|
|
Post by Steve Parker on Oct 20, 2020 10:28:33 GMT
Have still not found why the drivers for my thrustmaster wheel do not load at windows startup,just shows up as FFB racing wheel in devices and printers (windows 10 pro)and means i cannot access the wheels control panel, but if i plug in the wheel after starting windows it shows up correctly in devices and printers  have tried every method i have found on the web,anybody have any ideas  |
|
|
|
Post by Richard Coxon on Oct 20, 2020 10:33:11 GMT
Maybe try that it always has launch in admin mode? So every time you turn on your PC you’ll have to open the program to effectively get it working.
|
|
|
|
Post by Alberto Ibanez on Oct 20, 2020 10:47:24 GMT
Quite frakly it is better to have the wheel unplugged unless you are using it. My past experice includes frying a wheel controller on a spike/computer crash, so getting the habit of unplugging it would be the best.
|
|
|
|
Post by Steve Parker on Oct 20, 2020 13:31:37 GMT
Will plug it in after starting windows for now as long as it doesn't end up like last F1 race when I had no FFB and went to do pitstop and forgot to setup a button for it lol
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 20, 2020 16:09:06 GMT
Maybe a firmware update is neccesary?
|
|
|
|
Post by Steve Parker on Oct 20, 2020 20:38:46 GMT
Have updated the firmware to the latest Vadim,only started happening after the last windows 10 update
|
|
|
|
Post by François Remmen on Nov 3, 2020 17:42:15 GMT
|
|
|
|
Post by Alberto Ibanez on Nov 3, 2020 19:16:30 GMT
Says out of stock on that link?
Steve I think has a TM, as well as Timo, they might be able to weigh in. The pedals are good, Coxon also has them IIRC.
|
|
|
|
Post by Juha Bos on Nov 3, 2020 19:42:21 GMT
|
|
|
|
Post by Richard Coxon on Nov 3, 2020 19:54:30 GMT
Yes I have the same as Juha now (Hence me racing again as my last ones were funked, like Juha's 🤣)
They are great pedals, if you can afford, get some.
|
|
|
|
Post by Juha Bos on Nov 3, 2020 20:00:56 GMT
Definitely a step on the G29 quality (which failed us both).
|
|
|
|
Post by Pascal Mikula on Nov 3, 2020 20:35:16 GMT
Definitely a step on the G29 quality (which failed us both). Not a good omen for me then ... sounds like I should look for some new equipment, at least as far as pedals are concerned  |
|
|
|
Post by Richard Coxon on Nov 3, 2020 20:41:55 GMT
My wheel is still going strong with no issues (Touch wood) but Logitech pedal quality seems to get worse and worse with every new model. My G25 pedals lasted about 7 years, G27 about 3-4, G29 a little over a year (And out of warranty).
|
|
|
|
Post by Alberto Ibanez on Nov 3, 2020 21:57:18 GMT
I think you should be able to maintain and fix them with some simple tools but then again it always depends on motivation to do it. For me opening things and using tools to fix, maintain or improve mechanisms is a pleasure, for others it might be hell :-)
|
|
|
|
Post by Juha Bos on Nov 3, 2020 22:16:51 GMT
I didn’t exactly feel capable of opening the wheel itself and fixing that.  The pedals, I do have spares for, so if anyone is in need of new G25/27/29 potentiometers, the plastic rods, or springs, or even a rubber brake mod, I have them (but only once, I’m not a shop). |
|
|
|
Post by Kayo "Sideways" Michiels on Nov 4, 2020 16:30:48 GMT
No, but i do have a G27 in it's original box that's collecting dust since 2013... (that's when i upgraded to a Fanatc Turbo S, untill the motor broke down and i upgraded to a T300).
However it is advised to upgrade the firmware of your wheel if you have purchased the T-LCM pedals:
I had issues with the wheel disconnecting and not recognised by the PC, Thrustmaster resloved by releasing a firmware update that makes the wheel go into 'T-LCM' mode, which if you connect the T-LCM pedals directly to it, it would better recognise the pedals and no longer malfunction, you know it's in that mode, when you boot up the wheel and while it's doing it's calibration, the power light will blink 10 times. (https://ts.thrustmaster.com/download/accessories/Manuals/T_LCM/T-LCM_RJ12-pedal_set_mode_detection.pdf)
|
|
|
|
Post by Steve Parker on Nov 10, 2020 21:14:51 GMT
I Have a T300rs it was that firmware update that screwed mine,i use the T3PA Pro pedals in GT configuration and a TSS HANDBRAKE Sparco Mod sequential shifter. |
|
have tried every method i have found on the web,anybody have any ideas 
