|
T500
May 14, 2024 16:54:04 GMT
Post by Cláudio Augusto on May 14, 2024 16:54:04 GMT
Hey guys
Recently i bought myself a cheap T500 in a very good state, in a attempt to retire my old DFP. The problem is: The wheel works, but loses FF when i get out of the track. Then, when i rejoin for a lap, there's no FF anymore. So i have to disconnect and connect the wheel again to regain the FF.
I don't know if anyone of you uses (or have used) thrustmasters wheels, but i would appreciate any tip or help.
Thanks in advance.
Ps: I've tested on Automobilista, ETS, ATS and Forza 4. I'm using Windows 10 x64.
|
|
|
Post by Bruno Chacon on May 15, 2024 0:14:29 GMT
Do you have an assigned FF reset button? If you don't have one, assign one.
|
|
|
Post by Cláudio Augusto on May 15, 2024 12:47:54 GMT
Do you have an assigned FF reset button? If you don't have one, assign one. Yep, i have. But doesn't work.
|
|
|
Post by Alberto Ibanez on May 21, 2024 7:43:16 GMT
Make sure you have the latest drivers, and if you already do, uninstall them and see if the wheel runs OK with generic Windows drivers (Might recognize it as a generic game controller, or maybe even have older drivers). If it still does not work, try installing older versions of the drivers one by one. This would not the be the first time that a drivers or Windows update breaks something that was working well before.
|
|
|
Post by Anders Nilsson on May 21, 2024 13:11:02 GMT
|
|
|
Post by Cláudio Augusto on May 21, 2024 17:11:02 GMT
Thanks for the help guys. The firmware is properly installed, and along with the older drivers, i think i'll try in another PC too.
|
|
|
Post by Dante Barbera on May 29, 2024 8:06:49 GMT
I have a T150 and i have no such problem.
The Control Panel will be good use for you and make sure you're in PS3 (but maybe there no such choice with T500)
|
|
|
Post by Kayo "Sideways" Michiels on May 29, 2024 20:56:31 GMT
What's the FFB strength setting?
Because you should never set it at 100%!I usually set my ts-pc to 95% or sometimes to 90%.
And the FFB settiong ingame should also not set to max... because of spiking/overloading.
It might also be overheating, have you opened it up and checked for dust or other particles inside it?
|
|
|
T500
Jun 2, 2024 16:33:07 GMT
Post by Cláudio Augusto on Jun 2, 2024 16:33:07 GMT
I have a T150 and i have no such problem. The Control Panel will be good use for you and make sure you're in PS3 (but maybe there no such choice with T500) Yep, it doesn't have this option unfortunately
|
|
|
T500
Jun 2, 2024 16:38:38 GMT
Post by Cláudio Augusto on Jun 2, 2024 16:38:38 GMT
What's the FFB strength setting? Because you should never set it at 100%!I usually set my ts-pc to 95% or sometimes to 90%. And the FFB settiong ingame should also not set to max... because of spiking/overloading. It might also be overheating, have you opened it up and checked for dust or other particles inside it? Normally i tested with 75%, but i think it's some conflict with my keyboard or mouse (an USB thing). Pretty much because it's working on the other sims. Initially didn't work on ETS, ATS and Forza, but it was because the directional keys of my keyboard were assigned to the steering. Which is not happening on AMS. On iRacing and Assetto everything are ok too. It's really strange ![:(](//storage.proboards.com/forum/images/smiley/sad.png) Anyway, if i didn't solve this thing, i'll keep running with the DFP on AMS. No worries ![:)](//storage.proboards.com/forum/images/smiley/smiley.png)
|
|